1 (800) 514-1735 | 9am to 6pm ET (M-F)
Cart 0
IR-Tec-BBT-702SI-[option4]-[option5]-[option6]-[option7]-LeanLight

IR-Tec

BBT-702SI | Ivory Light Switch with PIR Sensor, 2-pole, 12-24VDC

$90.99

IR-Tec's BBT-702SI is a 2-pole, 12-24VDC ivory wireless light switch with motion sensor and screwless wall plate.  The low voltage wall switch sensor designed to fit in a standard NEMA wall box and used with power pack PPU-301. The sensors combines state-of-the-art passive infrared sensing technology with décor aesthetics to provide optimal energy-saving for all applications.

The BBT-702 contains two relays, and two push buttons for controlling two lighting loads or circuits independently together with the connected Power Packs or BMS. To comply with specific energy code, such as CA Title 24, the
sensor is factory set to control the primary output (pole 1) in occupancy sensing mode, and the secondary output (pole 2) in vacancy sensing mode. A variety of control options can be programmed via DIP switch settings to meet
specific energy code or customer requirements.

The model BBT-700S comes with an ambient light sensor (ALS) to inhibit the lighting if ambient light levels are higher than required. The Accu-Set digital potentiometers make delay time (TIME) and ambient light level (LUX) settings fast, easy and accurate. Isolated dry contact outputs allow the BBT-700 series to operate with two IR-TEC Power Packs for controlling two separate loads in occupancy and vacancy sensing bases.

 

APPLICATIONS

  • Classrooms                                    
  • Conference rooms
  • Parking Garages
  • Gymnasium
  • Garages
  • Hallways
  • Open Offices
  • Warehouses

FEATURES

  • Wireless Light Switch
  • Occupancy-Vacancy sensor 
  • Low profile
  • 180° Lens
  • Coverage 1,200 sq. ft.
  • Vandalism protection
  • Multi-way Manual Control
  • Screwless wall plate
  • 12-24VDC

 

BBT-702 data sheet

BBT-702 install sheet

  

 


Share this Product